Production of 1,4-Butanediol from Succinic Acid Using Escherichia Coli Whole-Cell Catalysis.

The widespread attention towards 1,4-butanediol (BDO) as a key chemical raw material stems from its potential in producing biodegradable plastics. However, the efficiency of its biosynthesis via current bioprocesses is limited. In this study, a dual-pathway approach for 1,4-BDO production from succinic acid was developed. Specifically, a double-enzyme catalytic pathway involving carboxylic acid reductase and ethanol dehydrogenase was proposed. Optimization of the expression levels of the pathway enzymes led to a significant 318 % increase in 1,4-BDO titer. Additionally, the rate-limiting enzyme MmCAR was engineered to enhance the kcat/KM values by 50 % and increase 1,4-BDO titer by 46.7 %. To address cofactor supply limitations, an NADPH and ATP cycling system was established, resulting in a 48.9 % increase in 1,4-BDO production. Ultimately, after 48 hours, 1,4-BDO titers reached 201 mg/L and 1555 mg/L in shake flask and 5 L fermenter, respectively. This work represents a significant advancement in 1,4-BDO synthesis from succinic acid, with potential applications in the organic chemical and food industries.

Metabolic Engineering of Escherichia coli for High-Level Production of l-Phenylalanine.

l-Phenylalanine (l-Phe) is widely used in the food and pharmaceutical industries. However, the biosynthesis of l-Phe using Escherichia coli remains challenging due to its lower tolerance to high concentration of l-Phe. In this study, to efficiently synthesize l-Phe, the l-Phe biosynthetic pathway was reconstructed by expressing the heterologous genes aroK1, aroL1, and pheA1, along with the native genes aroA, aroC, and tyrB in the shikimate-producing strain E. coli SA09, resulting in the engineered strain E. coli PHE03. Subsequently, adaptive evolution was conducted on E. coli PHE03 to enhance its tolerance to high concentrations of l-Phe, resulting in the strain E. coli PHE04, which reduced the cell mortality to 36.2% after 48 h of fermentation. To elucidate the potential mechanisms, transcriptional profiling was conducted, revealing MarA, a DNA-binding transcriptional dual regulator, as playing a crucial role in enhancing cell membrane integrity and fluidity for improving cell tolerance to high concentrations of l-Phe. Finally, the titer, yield, and productivity of l-Phe with E. coli PHE05 overexpressing marA were increased to 80.48 g/L, 0.27 g/g glucose, and 1.68 g/L/h in a 5-L fed-batch fermentation, respectively.

Ionic liquid catalyzed low-temperature hydrothermal carbonization of sewage sludge to produce hydrochar with low heavy metal content and positive energy recovery.

An ionic liquid (IL, [DMAPA]HSO4) was prepared to facilitate the removal of heavy metals by hydrothermal carbonization (HTC) in sewage sludge (SS) and to obtain a positive energy recovery (ER, (Energyoutput/Energyinput - 1) > 0). The results found that the removal efficiencies of the Fe, Mn, Zn, Co, and Cd from SS exceeded 75 % with positive ER (6 %) at 20 wt% IL dosage (IL:SS). IL promoted the HTC reactions of proteins and polysaccharides to produce fixed carbon and small molecule polymers. The process mainly relies on IL to catalyze the dehydration and graphitization of SS and to destroy the heavy metal binding sites such as carboxyl and hydroxyl groups. Additionally, IL aids in constructing the macropore structures in hydrochar, thereby facilitating the release of heavy metals and water during the HTC process. This discovery holds promise for removing heavy metals from SS by one-pot HTC processes with positive energy recovery.

A social-ecological approach for identifying and mapping ecosystem service trade-offs and conservation priorities in peri-urban areas.

Considering both ecological and social dimensions in the assessment of ecosystem services (ESs) can facilitate acceptable and inclusive management strategies, especially in peri-urban areas characterized by intricate human-ecosystem interactions. A limited body of research, however, has mapped the plural values of ESs and their different types of trade-offs in such areas. This research aimed to execute an interdisciplinary analysis of the biophysical and social values of ESs in peri-urban Shanghai, China, through a social-ecological approach that integrates spatial biophysical assessment with participatory mapping. Trade-off analysis in both ES types and ES valuations were then conducted, and multicriteria decision-making was applied for conservation. Our results reveal that trade-off intensities were lower within the social values compared to the biophysical values. Within both value dimensions, relatively stronger trade-offs were found between food production and other ESs. Areas with both high biophysical and social values were infrequently observed across ESs. Based on the characteristics of diverse values, our study identified priority conservation areas and provided management implications. We argue that adopting the integrated social-ecological perspective in sustainable environmental management contributes to the realization of harmonious coexistence between people and nature in peri-urban areas.

Design, Synthesis, and Biological Activity of Novel Triketone-Containing Phenoxy Nicotinyl Inhibitors of HPPD.

4-Hydroxyphenylpyruvate dioxygenase (HPPD) is a crucial target enzyme in albino herbicides. The inhibition of HPPD activity interferes with the synthesis of carotenoids, blocking photosynthesis and resulting in bleaching and necrosis. To develop herbicides with excellent activity, a series of 3-hydroxy-2-(6-substituted phenoxynicotinoyl)-2-cyclohexen-1-one derivatives were designed via active substructure combination. The title compounds were characterized via infrared spectroscopy, 1H and 13C nuclear magnetic resonance spectroscopies, and high-resolution mass spectrometry. The structure of compound III-17 was confirmed via single-crystal X-ray diffraction. Preliminary tests demonstrated that some compounds had good herbicidal activity. Crop safety tests revealed that compound III-29 was safer than the commercial herbicide mesotrione in wheat and peanuts. Moreover, the compound exhibited the highest inhibitory activity against Arabidopsis thaliana HPPD (AtHPPD), with a half-maximal inhibitory concentration of 0.19 µM, demonstrating superior activity compared with mesotrione (0.28 µM) in vitro. A three-dimensional quantitative structure-activity relationship study revealed that the introduction of smaller groups to the 5-position of cyclohexanedione and negative charges to the 3-position of the benzene ring enhanced the herbicidal activity. A molecular structure comparison demonstrated that compound III-29 was beneficial to plant absorption and conduction. Molecular docking and molecular dynamics simulations further verified the stability of the complex formed by compound III-29 and AtHPPD. Thus, this study may provide insights into the development of green and efficient herbicides.

Optimizing fluconazole-embedded transfersomal gel for enhanced antifungal activity and compatibility studies.

Fungal infections are of major concern all over the globe, and fluconazole is the most prevalently used drug to treat it. The goal of this research work was to formulate a fluconazole-embedded transfersomal gel for the treatment of fungal infections. A compatibility study between fluconazole and soya lecithin was performed by differential scanning calorimetry (DSC). Transfersomes were formulated by a thin-film hydration technique using soya lecithin and Span 80. A central composite design was adopted to prepare different formulations. Soya lecithin and Span 80 were chosen as independent variables, and the effect of these variables was studied on in vitro drug diffusion. Formulations were evaluated for entrapment efficiency and in vitro drug diffusion. The results of in vitro drug diffusion were analyzed using the analysis of variance (ANOVA) test. Optimized formulation was prepared based on the overlay plot and evaluated by scanning electron microscopy, DSC, vesicle size, polydispersity index (PDI), zeta potential, and in vitro drug diffusion studies. An optimized formulation was loaded into xanthan gum gel base and evaluated for pH, viscosity, in vitro and ex vivo drug diffusion, and antifungal activity. DSC studies revealed compatibility between fluconazole and soya lecithin. Entrapment efficiency and in vitro drug diffusion of various formulations ranged between 89.92% ± 0.20% to 97.28% ± 0.42% and 64% ± 1.56% to 85% ± 2.05%, respectively. A positive correlation was observed between in vitro drug diffusion and Span 80; conversely, a negative correlation was noted with soya lecithin. Entrapment efficiency, particle size, zeta potential, PDI, and drug diffusion of optimized formulation were 95.0% ± 2.2%, 397 ± 2 nm, -38 ± 5 mV, 0.43%, and 81 % ± 2%, respectively. SEM images showed well-distributed spherical-shaped transfersomes. In vitro, ex vivo drug diffusion and antifungal studies were conclusive of better diffusion and enhanced antifungal potential fluconazole in transfersomal formulation.

Systems engineering Escherichia coli for efficient production p-coumaric acid from glucose.

P-coumaric acid (p-CA), a pant metabolite with antioxidant and anti-inflammatory activity, is extensively utilized in biomedicine, food, and cosmetics industry. In this study, a synthetic pathway (PAL) for p-CA was designed, integrating three enzymes (AtPAL2, AtC4H, AtATR2) into a higher l-phenylalanine-producing strain Escherichia coli PHE05. However, the lower soluble expression and activity of AtC4H in the PAL pathway was a bottleneck for increasing p-CA titers. To overcome this limitation, the soluble expression of AtC4H was enhanced through N-terminal modifications. And an optimal mutant, AtC4HL373T/G211H, which exhibited a 4.3-fold higher kcat/Km value compared to the wild type, was developed. In addition, metabolic engineering strategies were employed to increase the intracellular NADPH pool. Overexpression of ppnk in engineered E. coli PHCA20 led to a 13.9-folds, 1.3-folds, and 29.1% in NADPH content, the NADPH/NADP+ ratio and p-CA titer, respectively. These optimizations significantly enhance p-CA production, in a 5-L fermenter using fed-batch fermentation, the p-CA titer, yield and productivity of engineered strain E. coli PHCA20 were 3.09 g/L, 20.01 mg/g glucose, and 49.05 mg/L/h, respectively. The results presented here provide a novel way to efficiently produce the plant metabolites using an industrial strain.

Rational design improves both thermostability and activity of a new D-tagatose 3-epimerase from Kroppenstedtia eburnean to produce D-allulose.

D-allulose is a naturally occurring rare sugar and beneficial to human health. However, the efficient biosynthesis of D-allulose remains a challenge. Here, we mined a new D-tagatose 3-epimerase from Kroppenstedtia eburnean (KeDt3e) with high catalytic efficiency. Initially, crucial factors contributing to the low conversion of KeDt3e were identified through crystal structure analysis, density functional theory calculations (DFT), and molecular dynamics (MD) simulations. Subsequently, based on the mechanism, combining restructuring the flexible region, proline substitution based onconsensus sequence analysis, introducing disulfide bonds, and grafting properties, and reshaping the active center, the optimal mutant M5 of KeDt3e was obtained with enhanced thermostability and activity. The optimal mutant M5 exhibited an enzyme activity of 130.8 U/mg, representing a 1.2-fold increase; Tm value increased from 52.7 °C to 71.2 °C; and half-life at 55 °C extended to 273.7 min, representing a 58.2-fold improvement, and the detailed mechanism of performance improvement was analyzed. Finally, by screening the ribosome-binding site (RBS) of the optimal mutant M5 recombinant bacterium (G01), the engineered strain G08 with higher expression levels was obtained. The engineered strain G08 catalyzed 500 g/L D-fructose to produce 172.4 g/L D-allulose, with a conversion of 34.4% in 0.5 h and productivity of 344.8 g/L/h on a 1 L scale. This study presents a promising approach for industrial-scale production of D-allulose.

Crystallization Kinetics of Perovskite Films by a Green Mixture Antisolvent for Efficient NiOx-Based Inverted Solar Cells.

Environment-friendly antisolvents are critical for obtaining highly efficient, reproducible, and sustainable perovskite solar cells (PSCs). Here, we introduced a green mixture antisolvent of ethyl acetate-isopropanol (EA/IPA) to finely regulate the crystal grain growth and related film properties, including the morphology, crystal structure, and chemical composition of the perovskite thin film. The IPA with suitable content in EA plays a key role in achieving a smooth and compact high-quality perovskite thin film, leading to the suppression of film defect-induced nonradiative recombination. As a result, the PSCs based on the EA/IPA (5:1) antisolvent showed a power conversion efficiency of 22.9% with an open-circuit voltage of 1.17 V.

Effect of Alloying Elements in Steels on the Interfacial Structure and Mechanical Properties of Mg to Steel by Laser-GTAW Hybrid Direct Lap Welding.

Mg alloy AZ31B was directly bonded to SK7 with a low alloy content, DP980 with a high Mn content, 316L with a high Cr and high Ni content by laser-gas tungsten arc welding (GTAW) and hybrid direct lap welding. The results showed that the tensile loads of AZ31B/SK7 and AZ31B/DP980 joints were 283 N/mm and 285 N/mm respectively, while the tensile load of AZ31B/316L joint was only 115 N/mm. The fracture and interface microstructures were observed using scanning electron microscopy (SEM), electron probe microanalysis (EPMA), and identified through X-ray diffractometry (XRD). For AZ31B/SK7 and AZ31B/DP980, the interface of the front reaction area and the keyhole reaction area was mainly composed of an Fe-Al phase and an Al-Mn phase. However, for AZ31B/316L, the interface of the keyhole reaction area was mainly composed of an Fe-Al phase and an Al-Mn phase, but a multi-layer composite structure consisting of the Mg17Al12 compound layer and eutectic layer was formed in the front reaction area, which led to a deterioration in the joint property. The influencing mechanism of Mn, Cr and Ni elements in steel on the properties and interface structure of the laser-GTAW lap joint between the Mg alloy and the steel was systematically analyzed.

Rational Design of Salmonella typhi Acid Phosphatase for Efficient Production of Pyridoxal 5'-Phosphate.

Pyridoxal 5'-phosphate (PLP) is highly valuable in food and medicine. However, achieving the efficient biosynthesis of PLP remains challenging. Here, a salvage pathway using acid phosphatase from Salmonella typhi (StAPase) and pyridoxine oxidase from Escherichia coli (EcPNPO) as pathway enzymes was established for the first time to synthesize PLP from pyridoxine (PN) and pyrophosphate (PPi). StAPase was identified as a rate-limiting enzyme. Two protein modification strategies were developed based on the PN phosphorylation mechanism: (1) improving the binding of PN into StAPase and (2) enhancing the hydrophobicity of StAPase's substrate binding pocket. The kcat/Km of optimal mutant M7 was 4.9 times higher than that of the wild type. The detailed mechanism of performance improvement was analyzed. Under the catalysis of M7 and EcPNPO, a PLP high-yielding strain of 14.5 ± 0.55 g/L was engineered with a productivity of 1.0 ± 0.02 g/(L h) (the highest to date). The study suggests a promising method for industrial-scale PLP production.

Prophylactic-dose direct oral anticoagulants for non-hospitalised people with COVID-19: A meta-analysis of randomised controlled trials.

Background: Several reviews have been conducted on thromboprophylaxis in non-hospitalised patients with coronavirus disease 2019 (COVID-19). In this systematic review and meta-analysis, we sought to investigate the impact of prophylactic-dose direct oral anticoagulants (DOACs) in this population. Methods: We searched PubMed, Web of Science, EMBASE and Cochrane Library for randomised controlled trials (RCTs) comparing prophylactic-dose DOACs with placebo or no treatment in non-hospitalised patients with COVID-19 until September 2023. The primary efficacy outcome was a composite of all-cause mortality and thromboembolic events, while major bleeding events were the primary safety outcome. We expressed continuous outcome data as mean differences (MDs) with 95% confidence intervals (CIs) and dichotomous outcome data as risk ratios (RRs) with 95% CIs. Results: We included six RCTs involving 4307 patients. Prophylactic-dose DOAC therapy compared with placebo or no treatment was associated with significantly decreased risks of the composite outcome of all-cause mortality and thromboembolic events (1.43% vs 2.67% (RR = 0.53; 95% CI = 0.34-0.82, P = 0.004, I2 = 3%)). Major bleeding events were infrequent, and we detected no significant differences between patients assigned to prophylactic-dose DOACs vs placebo or no treatment (0.19% vs 0.05% (RR = 2.50; 95% CI = 0.49-12.87, P = 0.27, I2 = 0%)). The use of prophylactic-dose DOACs was also associated with a reduction in venous thromboembolism, with no difference in all-cause mortality, arterial thromboembolism, hospitalisations, and clinically relevant nonmajor bleeding between two groups. Sensitivity analyses with the leave-one-out method for the primary efficacy and safety outcome did not change the effect estimate substantially. Conclusions: We found that prophylaxis-dose DOACs could significantly improve clinical outcomes and reduce venous thrombotic events without increasing the risk of major bleeding events compared with placebo or no treatment in non-hospitalised patients with COVID-19. Registration: PROSPERO: CRD42023466889.

Functional knee phenotypes appear to be more suitable for the Chinese OA population compared with CPAK classification: A study based on 3D CT reconstruction models.

PURPOSE: The aim of this study was to investigate the distribution of coronal plane alignment of the knee (CPAK) classification and functional knee phenotypes in a Chinese osteoarthritis (OA) population and to compare different lower limb alignment targets according to the distribution characteristics to find suitable total knee arthroplasty (TKA) bone cut strategies for the Chinese OA patients. METHODS: The computed tomography (CT) images were retrospectively collected and the three-dimensional (3D) models were reconstructed from 434 Chinese OA patients, including 93 males and 341 females, with a mean age of 66.4 ± 9.3 years. Femoral mechanical angle (FMA), tibial mechanical angle (TMA) and mechanical hip-knee-ankle angle (mHKA) were measured on the 3D models. Arithmetic hip-knee-ankle angle (aHKA) was calculated using FMA plus TMA, and joint line obliquity was calculated as 180 + TMA-FMA. The CPAK according to MacDessi and the functional knee phenotypes according to Hirschmann were performed. In addition, the suitable TKA bone cut strategies were explored according to the phenotypes and based on the characteristics of different alignment targets, such as mechanical alignment, anatomic alignment (AA), kinematic alignment, restricted KA (rKA) and adjusted MA (aMA). Statistical differences were determined using the independent-samples t-test or the two independent-samples Wilcoxon test, with p < 0.05 considered statistically significant. RESULTS: The Chinese OA population showed a varus alignment tendency (mHKA = 172.1° ± 7.2°), to which the TMA was a major contributor (TMA = 84.7° ± 4.4° vs. FMA = 91.3° ± 3.2°). The mHKA was on average 3.9° more varus than the aHKA. A total of 140 functional knee phenotypes were found and 45.6% were concentrated in VARFMA3°-NEUFMA0° to VARTMA3°-NEUTMA0°. More than 70% of patients had different FMA and TMA phenotypes. There were 92.9% of CPAK distributed in types I to IV, with type I accounting for 53.9%. The FMA phenotypes were less changed if the aMA and rKA were chosen, and the TMA phenotypes were less changed if the AA and rKA were chosen. CONCLUSION: Compared with the CPAK, the functional knee phenotypes were more suitable for the Chinese OA population with a wide distribution and a varus tendency, and it seemed more appropriate to choose aMA and rKA as TKA alignment targets for resection. LEVEL OF EVIDENCE: Level Ⅲ.

Boosting the Piezoelectric Response and Interfacial Compatibility in Flexible Piezoelectric Composites via DET-Doping BT Nanoparticles.

With the advent of the Internet of Things, self-powered wearable sensors have become increasingly prevalent in our daily lives. The utilization of piezoelectric composites to harness and sense surrounding mechanical vibrations has been extensively investigated during the last decades. However, the poor interface compatibility between ceramics nanofillers and polymers matrix, as well as low piezoelectric performance, still serves as a critical challenge. In this work, we employed Di(dioctylpyrophosphato) ethylene titanate (DET) as the coupling agent for modifying barium titanate (BTO) nanofillers. Compared to the BTO/PVDF counterpart, the DET-BTO/PVDF nanofibers exhibit an augmented content of piezoelectric ß phase (~85.7%) and significantly enhanced stress transfer capability. The piezoelectric coefficient (d33) is up to ~40 pC/N, which is the highest value among reported BTO/PVDF composites. The piezoelectric energy harvesters (PEHs) present benign durability and attain a high instantaneous power density of 276.7 nW/cm2 at a matched load of 120 MΩ. Furthermore, the PEHs could sense various human activities, with the sensitivity as high as 0.817 V/N ranging from 0.05-0.1 N. This work proposes a new strategy to boosting the piezoelectric performance of PVDF-based composites via DET-doping ceramics nanoparticles, and in turn show significantly improved energy harvesting and sensing capability.

Early ontogenesis from embryo to juvenile in Senegalese sole Solea senegalensis under laboratory conditions.

Senegalese sole, Solea senegalensis, is a flatfish of high commercial value in the world. It has been identified as an interesting and promising species for marine commercial aquaculture diversification in Europe for at least four decades and was introduced to China in 2003. Early ontogenesis from embryo to juvenile stages in S. senegalensis was analysed under controlled laboratory conditions to provide morphological information for aquaculture. From 0 to 59 days post hatching (dph), 10-20 larvae were sampled and measured each day (0-17 dph) or every 2-6 days (17-59 dph). Morphological characteristics from the egg to the juvenile stage were described. The eggs were separate and spherical with multiple oil globules. After 3 dph, the yolk sac was completely absorbed, mouth and anus were open, a swim bladder appeared, and larvae began feeding on rotifers (Brachionus plicatilis). The larvae began metamorphosis as the notochord flexed upward and the left eye migrated upward after 10 dph. The left eye migrated to the dorsal midline at 15 dph. At 19 dph, the left eye was translocated to the right-ocular side, and the juveniles adopted a benthic lifestyle. The swim bladder degenerated, and the juveniles completed metamorphosis at 23 dph. The growth patterns of some parameters (TL, SL, BH, BW) during larval and juvenile development stages were identified. The inflection points, which are slopes of growth changes, were calculated in growth curves. Three inflection points occurring in the growth curves of larvae and juveniles were found to be associated with metamorphosis, weaning, and transitions in feeding habits. The basic information of embryo development and ontogenesis in this study represents a valuable contribution to the S. senegalensis industry, especially in artificial breeding and rearing techniques.

Reprogramming the Transition States to Enhance C-N Cleavage Efficiency of Rhodococcus opacusl-Amino Acid Oxidase.

l-Amino acid oxidase (LAAO) is an important biocatalyst used for synthesizing α-keto acids. LAAO from Rhodococcus opacus (RoLAAO) has a broad substrate spectrum; however, its low total turnover number limits its industrial use. To overcome this, we aimed to employ crystal structure-guided density functional theory calculations and molecular dynamic simulations to investigate the catalytic mechanism. Two key steps were identified: S → [TS1] in step 1 and Int1 → [TS2] in step 2. We reprogrammed the transition states [TS1] and [TS2] to reduce the identified energy barrier and obtain a RoLAAO variant capable of catalyzing 19 kinds of l-amino acids to the corresponding high-value α-keto acids with a high total turnover number, yield (≥95.1 g/L), conversion rate (≥95%), and space-time yields ≥142.7 g/L/d in 12-24 h, in a 5 L reactor. Our results indicated the promising potential of the developed RoLAAO variant for use in the industrial production of α-keto acids while providing a potential catalytic-mechanism-guided protein design strategy to achieve the desired physical and catalytic properties of enzymes.

LDH/MXene Synergistic Carrier Separation Effects to Improve the Photoelectric Catalytic Activities of Bi2WO6 Nanosheet Arrays.

Photoelectric catalysis is a green and efficient way to degrade pollutants, which has been paid more and more attention by researchers. Among them, Bi2WO3 has been proved to have excellent photocatalytic oxidation activity on its {001} facets. In this study, {001}-oriented facets with high exposure were successfully integrated into Bi2WO6 nanoplate arrays (Bi2WO6 NAs) to create a photoelectrode. This structure was grown in situ on an indium tin oxide (ITO) substrate. To promote photogenerated carrier separation efficiency and reduce agglomeration of Bi2WO6 photocatalysts, the electrochemical deposition of NiFe-layered double hydroxide (NiFe-LDH) and Ti3C2 (MXene) were introduced in this research to synergistically catalyze pollutant degradation. Morphology, spectral characterization, and electrochemical analysis jointly confirmed that the outstanding performance of hole capture behavior with LDH and electron conduction properties with MXene were the main reasons for the improvement in catalytic activity of the photoelectrode. Taking bisphenol A (BPA) as the model pollutant, the rate constant k of the NiFe-LDH/Ti3C2/Bi2WO6 NAs photoelectrode reaches 0.00196 min-1 under photoelectrocatalytic (PEC) conditions, which is 4.5 times that of the pure Bi2WO6 NAs photoelectrode. This work provides a new way to improve the reaction kinetics of the PEC degradation of pollutants.

Performance of Spodoptera litura (Lepidoptera: Noctuidae) in responses to different amplitudes of alternating temperatures across permissive warm temperature regimes.

Climate change involves changes in the pattern of temperature fluctuations and the frequency and magnitude of thermal extremes. It is essential to investigate how insects respond to increased temperature variations, especially for species that usually experience diel temperature variations extending to thermal performance limits. To explicitly elucidate the effects of sizes of amplitudes of temperature variations, we used daily alternating temperatures with an equivalent mean of 28 °C to investigate the impact of different fluctuation amplitudes (±â€…0 °C,  ±â€…2 °C,  ±â€…4 °C, and  ±â€…6 °C) across permissive temperature regimes on the performance of Spodoptera litura FabriciusFabricius, a highly destructive polyphagous pest of crops and vegetables in tropical and temperate climates. Amplitudes of temperature fluctuations significantly affected developmental durations, adult life spans, pupal weights, fecundity, and fertility of S. litura. The survival rates from the egg stage to the adult eclosion did not differ significantly across different temperature treatments. The developmental durations of individual life cycles significantly increased with larger amplitudes in 3 fluctuating temperature treatments. The pupal weight was significantly lower and the adult life span was significantly shorter in the ±â€…6 °C treatment in all treatments. Fecundity and fertility were significantly reduced in the ±â€…6 °C treatment, making the continuation of generations nearly impossible. The results should provide critical information for understanding the ecology of this widespread pest under diel, seasonal, and global climate changes.

Deep eutectic solvents pretreatment enhances methane production from anaerobic digestion of waste activated sludge: Effectiveness evaluation and mechanism elucidation.

Anaerobic digestion (AD) is a prevalent waste activated sludge (WAS) treatment, and optimizing methane production is a core focus of AD. Two DESs were developed in this study and significantly increased methane production, including choline chloride-urea (ChCl-Urea) 390% and chloride-ethylene glycol (ChCl-EG) 540%. Results showed that ChCl-Urea mainly disrupted extracellular polymeric substances (EPS) structures, aiding in initial sludge solubilization during pretreatment. ChCl-EG, instead, induced sludge self-driven organic solubilization and enhanced hydrolysis and acidification processes during AD process. Based on the extent to which the two DESs promoted AD for methane production, the AD process can be divided into stage Ⅰ and stage Ⅱ. In stage Ⅰ, ChCl-EG promoted methanogenesis more significantly, microbiological analysis showed both DESs enriched aceticlastic methanogens-Methanosarcina. Notably, ChCl-Urea particularly influenced polysaccharide-related metabolism, whereas ChCl-EG targeted protein-related metabolism. In stage Ⅱ, ChCl-Urea was more dominant than ChCl-EG, ChCl-Urea bolstered metabolism and ChCl-EG promoted genetic information processing in this stage. In essence, this study investigated the microbial mechanism of DES-enhanced sludge methanogenesis and provided a reference for future research.

Draft genome sequence analysis of a mcr-1-producing Klebsiella pneumoniae ST661 isolated from a mink in China.

OBJECTIVES: Klebsiella pneumoniae is a major opportunistic pathogen that is a member of the Enterobacteriaceae. Klebsiella pneumoniae causes pneumonia in mink and has become the primary infectious disease that limits mink farming. In this study, we report the draft genome sequence of a multidrug-resistant (MDR) strain of K. pneumoniae that harbours the mcr-1 gene isolated from a mink in China. METHODS: The agar microdilution method was used to determine the minimum inhibitory concentration of the strain. The entire genomic DNA was sequenced using an Illumina MiSeq platform. A multilocus sequence type (MLST) and a core genome SNP phylogenetic tree analysis with a heatmap of the resistance genes and virulence genes were performed. RESULTS: The size of the genome was 5451.826 kb, and it included one chromosome and one plasmid. The draft genome of K. pneumoniae indicated that the isolate was a member of MLST 661. Four types of virulence genes were detected. The results of antimicrobial susceptibility testing showed multiple drug resistance, and 17 resistance genes were identified. CONCLUSION: The genome sequence reported in this study will help to reveal the key role of antibiotic resistance and pathogenic mechanisms. It will provide useful information for the role of mobile genetic elements in the adaptive translocation and spread of antimicrobial resistance.